Loading ...
Loading ...
Loading ...
10
OPERATION
Filling the water tank
In order to use the cooling/humidier function, you need to ll the water tank.
For your convenience, the water tank can be lled from the top of the unit
(1) saving removing the water tank.
Filling from the top
Open the water cover (1), and slowly pour ltered/clean water into the
compartment with a jug (as per below), and then close the water cover.
Removing & lling the water tank
Loosen the water tank xtures (6) on both sides of the unit, and slide the
pump paddle up (5) to move the pump to the top of the tank. The top part
of the unit should be free to detach from the water tank. Slowly pour water
into the water tank (7) with a jug.
Once the water tank has been lled to
the MAX ll line, replace the top part
of the unit back onto the water tank,
fasten the water tank xtures (6), and
slide the pump paddle back into the
water tank.
Loading ...
Loading ...
Loading ...