Loading ...
Loading ...
Loading ...
26 Multi zone
Installation
TEMP
FAN
SPEED
OPER
MODE
When pressing the button and button
simultaneously for more than 3 seconds, the
system will be entered into the installer setting
mode.
- After entering into the installer setting mode,
select the ceiling height setting code value by
pressing the oper-mode button.
* Remote controller master/slave setting code
value : 07
1
Select the desired setting value with the
temperature up(▲), down(▼) button.
2
When pressing the button, currently
established static pressure value will be set
up.
3
When pressing the button and button
simultaneously for more than 3 seconds after the
setting has been completed, the setting mode will
be released.
- If there isn’t any button input for more than 25
seconds, the installer setting mode will also be
released.
4
OPER
MODE
Code value
*Setting value
00:Slave
01:Master
OPER
MODE
Value
* Refer to the 'group control' part for details
- When controlling in groups, basic operation settings, airflow strength weak/medium/strong,
lock setting of the remote controller, time settings, and other functions may be restricted.
Remote controller Function
Master
Indoor unit operates based on master remote controller at group control.
(Master is set when delivering from the warehouse.)
Slave
Setup all remote controllers except one master remote controller to slave at
group control
It is a function for settings in group control, or 2-remote controller control.
Installer Setting - Group Setting
Loading ...
Loading ...
Loading ...