Loading ...
Loading ...
Loading ...
16mm
19mm
4x M3
Thread depth
3mm
The screw size is M3. Mount the motors using appropriate screws.
Note the thread depth and the size of the screws. Using screws that are too long or too
large may damage the motor.
1. Tighten the propellers by following the instructions above.
2. Hold the motor in place and remove the propeller according to the instructions above.
DO NOT use any thread locker on the propeller or motor threads.
5. Mounting the Motors
Mount each motor to a frame arm according to the size of the assembly hole.
6. ESC Ports Description
There are two ports on every ESC. They are Data/ESC Firmware Update Port and Outer ESC
LED Port. Identify the marks on the ESC.
Ensure your ESC rmware matches the motor you will attach it to. Refer to the tag on back
of the ESC to see the default rmware version.
Mount the outer ESC LED indicators according to your needs.
The Data/ESC Firmware Update Port is used to update the ESC rmware.
To do this, visit the ofcial DJI website to download the DJI ESC Assistant.
http://www.dji.com/product/e310/download
②①
©
2014 DJI. All Rights Reserved.
4
Loading ...
Loading ...