Loading ...
Loading ...
Loading ...
12
Cyclonic Filter Assembly: How to Clean
Remove dirt cup as described in Fig. 4.3.
4.9 Twist filter assembly (B) counter-clockwise.
Remove assembly from dirt cup (A).
4.10 Dirt and debris can be cleaned from the filter
assembly with the Dusting/ Upholstery Tool.
Place the filter assembly (4.9, B) on the dirt cup,
aligning (3) tabs on filter with (3) slots on dirt cup (A)
and twist it clockwise to secure into position.
Replace dirt cup as described in Fig. 4.5.
4.9
4.10
What to Buy: Carbon Filter
Carbon Filter may need to be replaced more
often to maintain optimal odor absorbing
effectiveness. Additional filter is available at
Hoover.com or call 1-800-944-9200. Ask for
Hoover
®
Part 902404001.
.
Carbon Filter : How to Clean
(Available on select models only).
Your Carbon Filter is located on the underside of
the Filter made with HEPA media.
IMPORTANT
DO NOT RINSE OR WASH the Carbon Filter.
Filter assembly must be properly aligned to
dirt cup to function properly.
IMPORTANT
Actual model may vary from images shown.
A
To reduce the risk of personal injury - Unplug
before cleaning or servicing. Do not use
vacuum without dirt cup or filters in place.
WARNING
! !
BRUSHROLL: How to Clean
4.11 Turn vacuum over so bottom side is facing up
and remove the (6) screws (A).
4.12 Pivot out bottom plate away from hidden latch
(B) and remove any debris and/or hair from the
brushroll.
4.13 Reposition bottom plate, aligning latch (B) and
fastening all (6) screws (A). Press firmly at latch (B)
area to ensure that it is properly latched.
4.11
A
CAUTION
! !
To reduce the risk of injury from moving parts -
Unplug before servicing.
4.13
A
B
4.12
B
B
Loading ...
Loading ...
Loading ...