Loading ...
Loading ...
Loading ...
10
4. MAINTENANCE
A Thermal Protector has been designed into your cleaner to protect it from overheating. When the
thermal protector activates the cleaner will stop running.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter, rinsable filter, and
HEPA filter for any obstructions. Clear obstructions if present.
When cleaner is unplugged and motor has cooled for 30 minutes, the thermal protector will deactivate
and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner
needs servicing.
NOTICE
! !
Familiarize yourself with these home maintenance tasks as proper use and
care of your vacuum will ensure continued cleaning effectiveness.
If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, take it to a service center prior to continuing use.
4.1 The System Check Indicator located at (A), alerts you to possible system
performance issues.
A
4.1
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
If System Check
Indicator is red:
1. Rinsable filter and/or filter made
with HEPA media is dirty.
1. Clean rinsable filter and/or filter made with
HEPA media - reference pg. 11
2. Dirt cup is full and/or clogged.
2. Empty dirt cup - reference pg. 10
3. Brushroll and/or hose is
clogged.
3. Check hose for clogging - reference pg 13.
Check brushroll for clogging - reference pg. 12.
Any other servicing should be done by an authorized service representative.
Actual model may vary from images shown.
4.2 To maintain optimal performance, empty the dirt cup before the dirt cup
reaches the max line (A). Place the vacuum in the upright position before
removing the dirt cup.
When to Empty
DIRT CUP
WARNING
! !
To reduce the risk of personal injury - Unplug before cleaning or
servicing. Do not use vacuum without dirt cup or filters in place.
Very fine materials, such as face powder or cornstarch, may seal the filter
and cause a reduction in performance. When using the vacuum for this
type of dust, empty the cup and clean the filters often.
4.2
A
Loading ...
Loading ...
Loading ...