Candy CCE616X Hoods

User Manual - Page 11

For CCE616X.

PDF File Manual, 26 pages, Download pdf file

Loading ...
Loading ...
Loading ...
10
EN
Section 7-2
Use soft cloth wetted with water to clean the exterior surface of the chimney hood. Never use
abrasive and scratching products for cleaning. The cloth must be applied in the same direction with
the brush in order to avoid scratching of the steel drum. The bulb glasses must not be removed
during cleaning.
CAUTION!
You may cause fire if you do not observe the rules pertaining to cleaning and replacing the filters of
the chimney hood.
Replacing the Bulb
There are 2 pieces of 25 W halogen bulbs on the chimney hood. First of all, plug out the product,
or turn off the power switch, or loosen or turn off the safety fuse supplying the chimney hood to
replace the bulb. Slightly press on the connecting tabs existing on the cover of the halogen bulb
with a thin tip screwdriver and push them downward. Hold the cover carefully not to let it drop down
when performing this operation. Slightly push the cover by aligning the tabs to the cavities on bulb
hole after the bulb is replaced. It is recommended that the new bulb is fixed with cloth. It is because
of fact that the life of the bulb will expire in 1 day when the halogen bulbs are touched with bare
hand.
CAUTION!
Touch the bulb only when you will replace it. The life of bulb will expire after one day when the
halogen bulb is touched when it is not broken.
Firstly, disconnect the electricity of the chimney hood and dismantle it if you need it to be
transported. Carry it in its original box, if possible, and observe the transportation signs put on the
box. If no original box, make sure that the product is packed so that it would protect from any
damage.
We kindly ask you to observe following recommendations:
1. Make sure that the Warranty Certificate is endorsed by the Authorized Seller when the
product is received.
2. Use the product in accordance with the principles provided in the instructions for use.
3. Ask for the “technician identity card” from the technician who came for the technical service.
Loading ...
Loading ...
Loading ...