Loading ...
Loading ...
Loading ...
12
13
collected in the drip tray beneath.
Take care to avoid scalds).
turn the grinding adjustment knob (g. 12) one click clockwise
(see “Adjusting the coee mill”).
Proceed one click at a time until coee delivery is satisfactory.
-
tisfactory, turn the grinding adjustment knob (g. 12) one click
anticlockwise (see “Adjusting the coee mill”).
Avoid turning the grinding adjustment knob excessively other-
wise when you select 2 cups, the coee may be delivered a drop
at a time.
short coee (less than 60 cc), rinse the cups with hot water
to preheat the cups.
If more than 2/3 minutes have passed since the last coee
was made, before requesting another coee, you must
preheat the infuser by pressing the button (C4) (g.
13).
Deliver the water into the underlying drip tray or alterna-
tively use this water to ll (and then empty) the cup to be
used for the coee, so as to preheat it.
will absorb too much heat.
interrupted at any moment by pressing the previously selected
button, (C8), (C9) or (C10).
of coee in the cup, just hold down the previously selected cof-
fee button, (C8), (C9) or (C10), until the required
amount is reached (this must be done within 3 seconds after
completion of delivery).
with water or the appliance will not deliver coee.
(It is normal for there to be a little water left in the tank when
the message is displayed).
-
grounds container is full and must be emptied and cleaned.
continues to display the message and coee cannot be made.
To clean, open the service door on the front of the appliance by
pulling the handle (g. 14), extract the drip tray (g. 15), empty
and clean.
When cleaning, always extract the drip tray completely to
avoid it falling when the grounds container is removed.
Empty the grounds container and clean thoroughly to remove
all residues left on the bottom.
Important! when removing the drip tray, the grounds
this is not done, when you make the next coees, the grounds
container may ll up more than expected and clog the machi-
ne.
-
livering coee.
If it is removed, it will not be possible to make the coee and
To use the appliance again, insert the hot water spout (g. 4) if
-
ver water from the spout for a few seconds.
CHANGING THE QUANTITY OF COFFEE IN THE CUP
The appliance is set by default to automatically make the fol-
lowing types of coee:
button (C8) is pressed;
button (C9) is pressed;
button (C10) is pressed.
To change these quantities, proceed as follows:
want to change, (C8), or (C9) or (C10), for at
the same button again to memorise the new amount.
The appliance is now reprogrammed with the new settings and
displays: “READY”.
Loading ...
Loading ...
Loading ...