Loading ...
Loading ...
Loading ...
Components
COLUMN ASSEMBLY INSTRUCTIONS
1. Take the base and column parts from the
packing box and loosen the plastic nut.
2. Fix the column on the base plate using
the plastic nut.
3. Unscrew the height adjusting knob.
4. Move the extension pole to the desired
height.
5. Then screw the height adjusting knob to
tighten the extension pole.
FAN BODY ASSEMBLY INSTRUCTIONS
1. Unscrew the spinner clockwise and the nut counter-clockwise to remove both of them.
2. Set the rear guard in the proper position with handle up.
3. Screw on plastic nut tightly to attach rear guard.
4. Discard plastic sleeve on motor shaft.
5. Install the blade onto the motor shaft until it reaches the retaining pin.
6. Screw retaining nut onto the motor shaft counter clockwise until tight.
7. Press the rim of the rear guard onto the front guard until the rear guard is properly fitted.
8. Secure both guards firmly by tightening the fan guard then close easy clip.
1. Front guard
2. Retaining nut
3. Fan blade
4. Locking nut
5. Rear guard
6. Motor shaft
7. Motor housing
8. Neck
9. Control box
10. Screw
11. Internal pole
12. Height adjustment ring
13. Outer pole
14. Base
15. Screw
16. Remote controller
Loading ...
Loading ...
Loading ...