Loading ...
Loading ...
Loading ...
Not for
Reproduction
5
Features and Controls
120 Volt AC, 20 Amp, GFCI Duplex Receptacles — Used
to supply 120 Volt AC, single phase, 60 Hz power for
electrical lighting, appliance, tool and motor loads.
120/240 Volt AC, 30 Amp Locking Receptacle — Used to
supply 120/ 240 Volt AC, single phase, 60 Hz power for
electrical lighting, appliance, tool and motor loads.
Circuit Breakers (5750 Watt ONLY) — The 120 Volt AC,
20A GFCI duplex receptacles are provided with “push to
reset” 20 Amp circuit breakers to protect the generator
against electrical overload.
CO Detection Carbon Monoxide (CO) Shutdown Indicator
Light — Indicates the engine shutdown due to carbon
monoxide accumulation around the generator or a CO
Detection system fault occurred.
Low Oil Shutdown — This unit is equipped with a low oil
protection device. Oil must be at proper level for engine
to run. If the engine oil drops below a preset level, an oil
switch will stop the engine. Check oil level with dipstick.
Main Breaker — Protects generator against electrical
overload. If breaker trips, it cuts power to all receptacles.
Engine Switch — Set this switch to ON (I) before starting
engine. Set switch to OFF (0) to shut off engine.
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and product warnings.
Main Breaker
120/240 Volt AC, 30
Amp Locking Receptacle
120 Volt AC, 20 Amp
GFCI Duplex Receptacles
Low Oil
Shutdown
Engine Switch
CO Detection™
Carbon Monoxide
(CO) Shutdown
Indicator Light
Circuit Breakers
Loading ...
Loading ...
Loading ...