Loading ...
Loading ...
Not for
Reproduction
3
Equipment Description
To Restore Home Power Using a Listed Transfer
Switch
Connections to your home’s electrical system must use a
listed* transfer switch installed by a licensed electrician.
The connection must isolate the generator power from
the utility power and comply with all applicable laws and
electrical codes. Power your home with a 30 Amp transfer
switch system.
120/240V
Outlet
—
Transfer
Switch
Typical Indoor Items
To Restore Power Using Extension Cords
1. Only use grounded cords marked for outdoor use rated
for your loads.
To provide power using extension
cords
Total
Amperage
Minimum Gauge, Outdoor Rated
Up to 50 FT (15 M) Up to 100 FT (30 M)
Up to 13A
16
14
Up to 15A
14
12
Up to 20A
12
10
Up to 30A
10
8
2. Follow cord safety instructions.
3. Install carbon monoxide alarm(s).
4. When operating generator with extension cords, make
sure it is located in an open, outdoor area, at least
20 ft. (6.1 m.) from occupied spaces with exhaust
pointed away.
5. Extension cords running directly into home, powering
indoor items IS NOT RECOMMENDED.
DANGER! Engine exhaust contains carbon
monoxide, a poisonous gas that will kill you in
minutes. You cannot smell it, see it, or taste it.
Even if you do not smell exhaust fumes, you could still be
exposed to carbon monoxide gas.
• Extension cords running directly into the home
increase your risk of carbon monoxide poisoning
through openings.
• If an extension cord running directly into the home is
used to power indoor items, the operator recognizes
that this increases the risk of CO poisoning to people
inside the home and assumes that risk.
6. Install a listed* transfer switch as soon as possible
if generator will be used to provide home power
restoration.
120V
OUTLET
* Certified by a Nationally Recognized Testing Laboratory that the
product complies to appropriate product safety test standards.
Loading ...
Loading ...
Loading ...