Loading ...
Loading ...
Loading ...
5
7. For proper wireless operation the MB50 requires
connection of both WLAN Anten-
nas. If it should become necessary
to replace one of the supplied An-
tennas, order part number 12245600
from the McIntosh Parts Department.
8. The performance of the MB50 is dependent upon
the speed and operational range of the Wireless
Router used.
9. When the MB50 is connected to a wired Home
Computer Network with a Wireless Router, the
speed should be 1 Gigabit or faster.
10. The Play-Fi App for Streaming Music and Remote
Control Operation of the MB50 is available at
Web Sites for download free of charge:
For Apple Powered Mobile Devices:
https://itunes.apple.com/us/app/play-fi/
id779245456?mt=8
For Android Powered Mobile Devices:
https://play.google.com/store/apps/details?id=com.
phorus.playfi&hl...
11. When there is an update to the Play-Fi App used
by the MB50, new functionality may be added.
Information about the new functionality would not
be covered in this edition of the MB50 Owners
Manual. Please refer to the Play-Fi Web Site and
the McIntosh Web Site for updated information:
https://www.play-fi.com - (Knowledge Base)
http://www.mcintoshlabs.com - (Products)
12. When discarding the unit, comply with local rules
or regulations. Batteries should never be
thrown away or incinerated but disposed
of in accordance with the local regulations
concerning battery disposal.
13. Periodically, check the McIntosh Web Site at
www.mcintoshlabs.com for the latest information
on the MB50 and other McIntosh Products.
1. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected
to the MB50 Streaming Audio Player.
2. For the MB50 to receive streaming audio signals
from a mobile device, a wireless router with Wi-Fi
capabilities is required, in order to facilitate com-
munications between the MB50 and the mobile
device.
3. When connecting the MB50 to a wired Home
Computer Network (of which
includes a wireless router) a
USB (2.0) to Ethernet (RJ45)
Adapter such as a Monoprice
(109466) is required.
4. The MB50 internal Digital
Circuitry is designed for 2-channel PCM (Pulse
Code Modulation) Digital Audio Signals.
5. The MB50 is designed to be compatible with the
majority of Audio Power Amplifiers. However, do
to a wide range of Power Amplifier Designs, it is
important the input sensitivity of the amplifier be
at least 2 Volts. This will assure music recordings
are reproduced with adequate dynamic range. This
will assure the playback of most music record-
ings are reproduced with adequate dynamic range.
Check with your McIntosh Dealer for additional
information.
6. If it should become necessary to replace the sup-
plied AC / DC Power Adapter, for use in North
America order part number
75190800. The Power Adapter for
use in other countries, order part
number 75177200. Both Power
Adapters are available from the
McIntosh Parts Department.
XLR Connectors
Below is the Pin configuration for the XLR Balanced
Output Connectors on the MB50. Refer to the diagram
for connection:
PIN 1: Shield/Ground
PIN 2: + Output
PIN 3: - Output
Power Control Connector
The Trigger Input Jack receives Power On/Off Signals
(+12 volt/0 volt) when connected to other McIntosh
Components. The Trigger Output
Jack sends Power On/Off Signals
(+12 volt/0 volt) when connected
to other McIntosh Components.
An additional connection is for
controlling the illumination of the Power Output Me-
ters on McIntosh Power Amplifiers. A 3.5mm stereo
mini phone plug is used for connection to the Power
Control Jacks.
General Information Connector and Cable Information
PIN 1
PIN 2
PIN 3
Power
Control
Ground
Meter
Illumination
Control
Pass Thru
General Information, Connector and Cable Information
Loading ...
Loading ...
Loading ...