Loading ...
Loading ...
Loading ...
19
5. The just selected Input (Coaxial) can now
be streamed to the Wireless Loudspeakers
(Bedroom 1) and can also be listened to in the
Living Room (via the MB50). Referring to
gure 44 make the appropriate room selections
followed by selecting “DONE”.
6. The selected Input (Coaxial) will now be play-
ing in both rooms (Living Room and Bedroom
1). There are three Volume Control Adjust-
ments available, Living Room, Bedroom 1 and
a Master Volume affecting both rooms at the
same time. Refer to gure 45 on the next page.
3. Then select the MB50 (Living Room) in the
Line In Window. Refer to gure 42.
4. Now select the Audio Source Coaxial Input
to be streamed to the Wireless Loudspeakers
located in Bedroom 1. Then select “NEXT”.
Refer to gure 43.
Line In Streaming Mode
The MB50 has the ability to stream the audio from the
selected Audio Input (Digital or Analog) via the Play-
Fi App to Wireless Loudspeaker Systems, such as
the McIntosh RS100, located in another room. In the
following example the MB50 is located in the living
room and in the bedroom a pair of Wireless Powered
Loudspeakers (like the McIntosh RS100). To activate
the Line In Streaming Mode perform the following
steps:
Note: Before proceeding below, it is first important
to setup the Wireless Loudspeakers using the
Play-Fi App either as a single Loudspeaker or
as a Stereo pair. Refer to the information sup-
plied with the Wireless Loudspeaker(s).
1. Start the Play-Fi App on the Mobile Device and
select the “Plus Symbol”. Refer to figure 40.
2. From the plus menu, select “Line In”. Refer to
fig ure 41.
Figure 40
Select the Plus Symbol
Figure 41
Figure 42
Figure 44
Figure 43
How to Operate the MB50, con’t
Loading ...
Loading ...
Loading ...