Loading ...
Loading ...
Loading ...
16
Front Panel Display Wi-Fi/NET LED Indicator
changes color from Green to Red. Then release the
two Push-buttons. The Power Save Mode is now
Disabled.
2. To Enable the Power Save Mode repeat step 1 and
the Wi-Fi/NET LED Indicator will change color
from Red to Green.
Network Sleep Mode
The Network Sleep Mode is Enabled by default. With
the Sleep Mode active, the MB50 will automatically
switch On when the Mobile Device Play-Fi App
is started and the assigned name (for the MB50) is
selected. When the MB50 is connected to AC Power
for the first time (or if a Reset to Factory Default Set-
tings is performed) its operational status is “Standby
Mode”. After switching AC Power first On to the
MB50 the Operation Status will automatically change
to the “Sleep Mode” when it is switched Off. To place
the MB50 in Standby Mode for just the current time
(Sleep Mode Disabled), perform the following step:
1. With the MB50 On, press and hold the STANDBY/
ON Push-buttons until the Front Panel STANDBY/
ON LED Indicator changes color from Green to
a flashing Red. Then release the STANDBY/ON
Push-button. When the MB50 has completed the
change, the MB50 will swtich Off and the Front
Panel STANDBY/ON LED Indicator color is a
constant Red. The MB50 is now in the Standby
Mode.
The next time the MB50 is switched On the Network
Sleep Mode will automaticaly re-activate.
Source Selection
To select the desired audio source, press the INPUT
Push-button on the Front Panel of the MB50 or press
occurs approximately 2 hours after there has been an
absence of audible audio signals on the selected input
or user activity (includes changes to any of the Opera-
tion Functions such as Input selection, Volume adjust-
ment, etc). It also allows for choosing between if the
Network Connection (Sleep Mode) is maintained or
the Network Connection (Standby Mode) becomes ac-
tive thus terminating the Network Connection. If it is
desired to enable the Auto Off Feature perform either
of the following:
Auto Off with Network Sleep Mode Disabled:
1. Press and hold simultaneously the Wi-Fi/NET
and VOLUME ▼ (Down) Push-buttons until the
Front Panel Display Wi-Fi/NET LED Indicator
changes color from Green to Red. Then release the
two Push-buttons. The Power Save Mode is now
Disabled.
2. To Enable the Power Save Mode repeat step 1 and
the Wi-Fi/NET LED Indicator will change color
from Red to Green.
Auto Off with Network Standby Mode Enabled:
1. Press and hold simultaneously the STANDBY/
ON and VOLUME ▲ (Up) Push-buttons until the
How to Operate the MB50
Your McIntosh MB50 is factory configured for imme-
diate enjoyment of superb audio from a Mobile Device
via Play-Fi or one of the external devices connected to
the Rear Panel of the MB50.
If you wish to make a Play-Fi wireless connection
between the Mobile Device and the MB50, please re-
fer to “Introduction to Setting Up the MB50” on page
14 for additional information.
Power On
Press the ON/STANDBY Push-button on the Front
Panel of the MB50 or press the Power Push-button
on the Remote Control to switch On the MB50. Refer
to figures 30 and 31.
FRONT PANEL STANDBY/ON INDICATOR
MB50
On/Off
Color
of LED
Operation Status Network Connection
Status
Off Red Standby Mode Not connected
Off Orange Sleep Mode Maintains Connection
On Green On Mode Connection if established
Power Mode
The MB50 incorporates an Auto Off Feature, which
automatically places it into the Power Save Mode. This
Figure 30
Loading ...
Loading ...
Loading ...