Loading ...
Loading ...
Loading ...
EN
ZH
TH
MS
15
Cleaning and care of the other
parts of the appliance
• Unplug the appliance before cleaning.
• Clean the outside of the Rice Cooker, the inside of the lid
–
Fig.19 and the cord with a damp cloth and wipe dry. Do
not use abrasive products.
• Do not use water to clean the interior of the appliance body
as it could damage the heat sensor.
Malfunction description Causes Solution
Any indicator lamp off and no
heating.
Rice cooker not plugged.
Verify the main plug is well
engaged in the product body.
Any indicator lamp off and
heating.
Problem of the connection of
the indicator lamp or indicator
lamp is damaged.
Send to the authorized service
center for repair.
Cooking indicator lamp off,
keep warm indicator on.
Cook button is not in cooking
position.
Put the cook button in low
position (cooking).
Steam leakage during using.
Lid is badly closed.
Open and close again the lid.
Micro pressure valve not well
positioned or uncomplete.
Stop the cooking (unplug the
product) and check the valve is
complete (2 parts locked
together) and well positioned.
Lid or micro pressure valve
gasket is damaged.
Send to the authorized service
center for repair.
Rice half cooked or overtime
cooking.
Too much or not enough water
compared to rice quantity.
Refer to table for water
quantity.
Rice half cooked or overtime
cooking.
Not sufficiently simmered.
Simmer as required in table
cooking paragraph.
Automatic warm-keeping fails
(product stay in cooking
position, or no heating).
Send to authorized service
center for repair.
Water leakage on the table.
Dew collector missing or dew
collector overflow.
Empty the dew collector for each
use verify good positionning of
the dew collector.
Remark: if inner bowl is deformed, do not use it anymore and get a replacement from the
authorized service center for repair.
Technical troubleshooting guide
FuzzyLogic_NC00112494_Mise en page 1 27/03/12 08:47 Page15
Loading ...
Loading ...
Loading ...