Loading ...
Loading ...
Loading ...
EN - 19
ADJUST DISCHARGE CHUTE
DEFLECTOR LEVER
See Figure 29.
If deflector does not stay in selected position,
tighten the nut under the control panel.
If deflector does not follow full range of travel:
1. Position deflector control in the rear-most
position.
2. Adjust nuts on chute cable. See
Figure 30.
• To adjust deflector lower, loosen lower
nut and tighten upper nut.
• To adjust deflector higher, loosen upper
nut and tighten lower nut.
ADJUST DISCHARGE CHUTE
See Figure 31.
If discharge chute does not stay in selected
position, tighten nut on carriage bolt.
ADJUST SPEED SELECTOR
LEVER
See Figure 32.
1. Disconnect adjustment pivot pin from
speed selector arm. Save hardware for
reinstallation.
2. Position speed selector lever in fastest
forward position.
3. Turn speed selector arm down as far as it
will go.
4. Loosen jam nut on shift rod.
Figure 28
Figure 29
Figure 30
1. Chute Cable
2. Upper Adjustment Nut
3. Lower Adjustment Nut
1
2
3
Figure 31
Loading ...
Loading ...
Loading ...