Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
STEP 9
Insert the PEDAL SHAFT(19) through holes located on the CENTER BEAM(2). lide a PEDAL SPACER(20)
and a PEDAL CAP(18) onto each end of thePEDAL SHAFT(19). Then secure thePEDAL CAPS(18)
with BUTTON HEAD BOLTS(M8x1.25x15mm)(21) and LARGE WASHERS(M8)(22) at both ends of the
PEDAL SHAFT(19).
NOTE: You need to use two Allen Wrenches to tighten the BUTTON HEAD BOLTS(M8x1.25x15mm)(21)
at both ends of the PEDAL SHAFT(19) at the same time.
10
Loading ...
Loading ...
Loading ...