Loading ...
Loading ...
Loading ...
Connecting the Unit
GB
14
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When
pulling out a cable, be sure to pull it out from the plug, not the cable itself.
• Refer to the operating instructions of the connected equipment.
Connecting the Unit
When you monitor and control the projector via the network, access the Setup page of the projector (refer to “Using Network Features” in
the Operating Instructions) via a Web browser and enable the desired control protocol.
Step 3
Right side of the unit
Equipment with HDMI
output connectors
to HDMI
output
HDMI cable (not supplied)
Computer
: Video signal flow
AV amplifier
Speakers
to HDMI input
Use a Premium High Speed HDMI cable on which the cable type logo is
specified.
For more information, refer to “Connections and Preparations” in
the Operating Instructions contained in the supplied CD-ROM.
Loading ...
Loading ...
Loading ...