Loading ...
Loading ...
Loading ...
Front Suspension Adjustments
(cont’d)
Adjustments for Competition 125
26. Clean the threads of the front brake caliper
mounting bolts (29) and brake caliper
thoroughly.
Apply locking agent to the bolt threads.
Install the brake caliper (24) on the slider and
tighten the front brake caliper mounting bolts
to the specified torque:
22 lbf·ft (30 N·m, 3.1 kgf·m)
27. Clean the surfaces where the axle and axle
clamps contact each other.
Apply grease to each dust seal lips of the front
wheel.
Install the left side collar (30) and right side
collar (31) into the wheel hub.
28. Install the front wheel between the fork legs
while inserting the disc between the pads,
being careful not to damage the pads.
29. Insert the front axle shaft through the forks and
wheel hub from the right side. Make sure that
the front axle shaft is seated firmly onto the left
fork leg clamp inner surface. Tighten the front
axle nut (32) to the specified torque:
65 lbf·ft (88 N·m, 9.0 kgf·m)
Tighten the left axle pinch bolts (33) to the
specified torque:
15 lbf·ft (20 N·m, 2.0 kgf·m)
30. Install the handlebar (34), mounting rubbers,
washers and handlebar lower holder nuts (35)
and tighten the handlebar holder nuts to the
specified torque:
32 lbf·ft (44 N·m, 4.5 kgf·m)
31.
Install the number plate (page 105).
(24) brake caliper
(25) brake hose
(26) stay B
(27) stay A
(28) brake hose clamp bolts
(29) front brake caliper mounting bolts
(28)
(27)
(26)
(25)
(29)
(24)
(30) left side collar (31) right side collar
(32) front axle nut
(33) left axle pinch bolts
(30)
(31)
(33)
(32)
(34) handlebar
(35) mounting rubbers, washers and handlebar lower
holder nuts
(34)
(35)
Loading ...
Loading ...
Loading ...