Loading ...
Loading ...
Loading ...
122 Adjustments for Competition
Front Suspension Adjustments
9. Measure the clearance between the fork center
bolt lock nut (2) and fork center bolt (12).
Standard: 0.06 – 0.08 in (1.5 – 2.0 mm)
If the clearance is out of specification, check the
fork center bolt lock nut and fork center bolt
installation.
10. Tighten the fork center bolt lock nut (2) to the
fork center bolt (12) closely by hand. Tighten
the fork center bolt lock nut to the specified
torque:
16 lbf·ft (22 N·m, 2.2 kgf·m)
11. Remove the piston base or mechanic’s stopper
tool while pushing the fork damper.
Apply locking agent to the fork center bolt
threads.
Install the fork center bolt (12) to the axle
holder and tighten it to the specified torque:
51 lbf·ft (69 N·m, 7.0 kgf·m)
12. Measure the length between the axle holder
and outer tube.
Standard: 12.5 ± 0.1 in (316.5 ± 2 mm)
13. Compare the length (13) at assembly and at
disassembly. They should be the same length.
If the length at assembly is longer than at
disassembly, check the fork center bolt and fork
center bolt lock nut installation.
14. Remove the fork damper from the fork.
15. Pour the recommended fork oil (14) into the
fork assembly (1)
Recommended Oil: HP Fork Oil, SS-19
(2) fork center bolt lock nut (12) fork center bolt
(2) fork center bolt lock nut
(12) fork center bolt
(2)
(12)
0.06 – 0.08 in
(1.5 – 2.0 mm)
(2)
(12)
(12) fork center bolt
(13) length
(12)
(13)
(1) fork assembly (14) fork oil
(1)
(14)
Loading ...
Loading ...
Loading ...