Loading ...
Loading ...
Loading ...
9
RH200 SOLARIS DELUXE HEATER – OPERATING INSTRUCTIONS
6. Ignition Failure: If the heater fails to ignite, then turn
the power off at the power point.
- Wait 10 seconds, then turn the power back on
at the power point. If the heater fails to
ignite after 6 attempts, refer to the troubleshooting
guide in the back of the instruction manual for
further guidance or alternatively contact the Sitro
Service Team on 1300 174 876 (Mon – Fri)
8.00am – 5.00pm or Email
[email protected] for technical support.
STOP - TURNING THE HEATER OFF
1. Turning the unit off temporarily: To turn the heater off
temporarily, simply turn the power off at the power
point leaving the gas supply on.
2. Turning the unit off permanently: Firstly, turn the
power off at the power point and secondly shut the
gas off at the gas supply.
- If the heater is connected to a ball valve socket
containing an on/off tap, then simply turn the gas
off at the tap.
- If the heater is connected to a bayonet point,
then the hose will need to be disconnected from
the bayonet socket to shut the gas off.
Note:
The heater must be completely shut off for 10 minutes
before being relighted. This allows for any excess gas to
dissipate and for the unit to cool down.
IMPORTANT
Popping Noise:
When turning the heater on and off, there will be
a slight popping noise which is normal when the
burner is ignited or extinguished. If, however a
popping noise occurs when the unit is running,
turn off the heater at the power and gas supply
and contact the Sitro Service Team for further
advice.
Smoke & Odour:
Fumes will be emitted from the heater upon first
use which is smoke and odour from oil from
manufacturing being burnt. Important to avoid
inhaling the fumes. Generally, odour and smoke
will dissipate after approx. 20-30 minutes.
Wind Protection:
Important to protect the heater from wind while
attempting to light.
Loading ...
Loading ...
Loading ...