Loading ...
Loading ...
Loading ...
12
Consider the following for optimal performance:
– Make sure that no furniture or other objects are
obstructing airflow.
– Keep the filter clean.
– Shut any curtains in any room exposed to direct
sunlight to prevent the room from becoming
unnecessarily warm.
– Keep all doors and windows closed to prevent warm
air from entering the room.
– The cooling function of the air conditioner works best
in rooms with an ambient temperature of 17–35ºC.
– The dehumidifying function of the air conditioner
works best in rooms with an ambient temperature
of 13–35ºC.
UNPACKING
– This product has been packaged to protect it against
transportation damage. Unpack the appliance and
keep the original packaging carton and materials
in a safe place. It will help prevent any damage if
the product needs to be transported in the future,
and you can use it to store the appliance when it is
not in use. In the event the carton is to be disposed
of, please recycle all packaging materials where
possible.
– Plastic wrapping can be a suocation hazard for
babies and young children, so ensure all packaging
materials are kept out of their reach and disposed
of safely.
– Unwind the cord fully and inspect it for damage.
Do not use if any part is damaged. In case of
damage, contact our after sales support line for
advice.
– Read the manual to familiarise yourself with all parts
and operating principles. Pay particular attention to
the safety instructions on the previous pages.
WARNING! ELECTRIC SHOCK HAZARD!
Before installation or servicing, ensure the unit is
switched o and disconnected from the power outlet to
prevent possible injury.
LOCATION
When deciding on an installation place, keep the
following points in mind:
– The area must be flat and the air outlets must not be
covered up.
– There must be a properly earthed AC 220~240V 50Hz
power point nearby.
– The air exhaust can be installed in a vertical or
horizontal sliding window. Window installation
instructions follow on the next pages.
– There must be a clearance of at least 30cm between
the appliance and the wall or any other obstacles.
Maintaining this 30cm clearance is essential;
failure to keep that distance can result in the unit
malfunctioning or causing injury.
IMPORTANT NOTE: Do not install this appliance at a dry
cleaner’s premises.
TOOLS REQUIRED
– Medium Philips screwdriver
– Tape measure or ruler
– Knife or scissors
– Optional: Saw, to shorted window adaptor for narrow
windows (Window Installation Kit suits windows
67.5–123cm)
Installation, service, maintenance and repair of this unit
must be performed by a certified technician.
INSTALLING THE AIR EXHAUST DUCT
The portable air conditioner window kit comes with
the parts shown on page 11.
Note:
– The exhaust hose should be used when the COOL or
AUTO functions are selected in order to divert warm
exhaust air.
– The exhaust hose does not need to be mounted when
the FAN or DRY functions are used.
– The exhaust hose can be mounted in a window or a
simple temporary set up can be used to prop up the
exhaust hose to discharge the excess warm exhaust
air.
Installation
NOTE: All illustrations in this manual are for explanation purposes only. Your unit may appear dierently.
Loading ...
Loading ...
Loading ...