Loading ...
Loading ...
Loading ...
13
First Steps
Tur ning the Camera Off
To turn the camera off when the power-on lamp is lit, rotate the power-on switch. Do
not remove the batteries or disconnect the AC adapter until the power-on lamp has
gone out.
Auto Power Off ( Standby Mode)
If no operations are performed for thirty seconds (three minutes when menus are
displayed), the monitor will turn off automatically and the camera will enter standby
mode to reduce the drain on the batteries (when the camera is powered by an AC
adapter, the monitor will turn off after thirty minutes). While the camera is in standby
mode, the power-on lamp will blink. The camera will be reactivated when you:
• Rotate the power-on switch
• Press
or press the shutter-release button halfway
• Press the button to view the last picture taken
• Press the MENU button to display the menu for the current mode
• Rotate the mode dial to select a new mode
The length of time before the camera enters standby mode can be changed using the
Auto off option in the setup menu ( 79).
If no operations are performed for three minutes after the camera enters standby
mode, the camera will turn off automatically and the power-on lamp will go out.
The Power-on Lamp
When the power-on lamp is The camera is
On On
Blinking In standby mode
Off Off
Loading ...
Loading ...
Loading ...