Loading ...
Loading ...
Loading ...
14
Put your brush bar back into position and
press firmly until it clicks back into position.
Check the red locking lever is in the
unlocked position. Align the cleaner head
cover with the guide on the main body.
Push it down until it clicks into position.
Push the red locking lever up until it clicks
into position and push the base plate back
into place.
Clearing blockages from your Hair screw tool
Remove the cover and brush bar
Pull your brush bar firmly to remove it from
the main body.
Check and remove any obstructions from
all three parts of your Hair screw tool.
Your Hair screw tool isn't washable.
Wipe over with a damp lint-free cloth.
Don’t put any part of your machine in
a dishwasher or use detergents, polishes
or air fresheners.
Remove the Hair screw tool from the wand
or machine.
Push the base plate open. Press the red
lever down to release the cleaner head cover.
Pull the cleaner head cover off the main
body of the tool.
Look for obstructions Re–assemble Hair screw tool
2
1 3
Your Hair screw tool doesn’t have a washable brush bar.
To maintain optimum performance, check your brush bar
regularly and clear any obstructions.
Make sure your machine is disconnected from the charger
and take care not to touch the trigger.
The curved locking lever
located on the back of the tool.
Remove any hair or fibres
that have been wrapped
around the brush bar.