Loading ...
Loading ...
Loading ...
Safety Warnings and Installation in Brief (English)
WARNING/CAUTION!
• Hazardous voltages exist inside—do not remove cover.
• Refer servicing to a qualified technician.
• To prevent fire or shock hazard, do not expose this
module to moisture.
• Turn amplifier off and unplug speaker should any
abnormal conditions occur.
• Turn amplifier off before making or breaking any sig-
nal connections!
• Do not operate if there is any visual damage to the
electrostatic panel element.
• Do not drive speaker beyond its rated power.
• The power cord should not be installed, removed,
or left detached from the speaker while the other
end is connected to an AC power source.
• No candles or other sources of open flame should
be placed on the speaker.
• No liquids either in glasses or vases should be placed
on speaker.
• Speaker should not be exposed to dripping or
splashing liquids.
• The terminals marked with the lightning bolt symbol
should be connected by an instructed person or by
way of ready made terminals.
• The power cord should remain readily operable
should any abnormal conditions occur.
We know you are eager to hear your new MartinLogan loudspeakers,
so this section is provided to allow fast and easy set up. Once you have
them operational, please take the time to read, in depth, the rest of
the information in the enclosed manual. It will give you perspective on
how to attain the greatest possible performance from this most exact-
ing transducer.
If you should experience any difficulties in the setup or operation
of your MartinLogan speakers, please refer to the Room Acoustics,
Placement or Operation sections of the enclosed owner’s manual.
Should you encounter a persistent problem that cannot be resolved,
please contact your authorized MartinLogan dealer. They will provide
you with the appropriate technical analysis to alleviate the situation.
Step 1: Unpacking
Remove your new MartinLogan speakers from their packing.
Step 2: Placement
Start by placing the speakers about two feet from any wall and angle
them slightly toward your listening area. Please see the Placement sec-
tion of the enclosed manual for more details.
Step 3: Power Connection (AC) (see warning)
MartinLogan speakers require AC power to energize their electrostatic
cells. Using the AC power cords provided, plug them in first to the AC
power receptacle on the rear panel of the speaker, making sure that
you have made a firm connection, and then to the wall outlet. Please
see the Operations section of the enclosed manual for more details.
Step 4: Signal Connection
Use the best speaker cables you can. Higher quality cable, available
from your specialty dealer, is recommended and will give you superior
performance. Spade connectors are suggested for optimum contact
and ease of installation.
Attach your speaker cables to the Signal Input section on the rear
panel. Be consistent when connecting speaker leads to the terminals
on the back of the speaker: take great care to assign the same color to
the (+) terminal on both the left and right channels. If bass is nonex-
istent and you cannot discern a tight, coherent image, you may need
to reverse the (+) and (–) leads on one side to bring the system into
proper polarity.
If your speaker is equipped for Bi-wiring/Passive Bi-amping, turn to the
Operations section of the enclosed manual for proper setup of your
MartinLogan speakers.
Step 5: Listen and Enjoy
Sikkerhedsanvisninger og gode råd om installationen (Dansk)
ADVARSEL!
• Undgå at fjerne coveret.
• Overlad alle former for service og reparation til en
kvalificeret tekniker.
• For at undgå elektriske stød og risiko for ildebrand
bør dette produkt ikke udsættes for fugt.
• Afbryd forstærkeren når anlægget ikke er i brug i
længere perioder.
• Afbryd altid forstærkeren før du tilslutter eller afbry-
der forbindelsen til dine højttalere!
• Undgå at belaste højttaleren med højere effekter
end angivet.
• Undgå at anvende højttaleren hvis der er synlige
skader på det elektrostatiske panel.
• Lysnetkablet bør ikke tilsluttes, fjernes eller efter-
lades på gulvet, hvis stikket i den anden ende er
tilsluttet en lysnetkontakt.
• Undgå brugen af åben ild og stearinlys på eller i
nærheden af højttalerne.
• Undgå konsekvent at stille væskefyldte vaser og glas
på højttalerne.
• Højttalerne bør under ingen omstændigheder
udsættes for fugt eller stænk med væsker.
• Terminalerne der er markeret med lyn-symbolet bør
kun tilsluttes af en faglært installatør eller ved brug af
præfabrikerede kabler monteret med de helt rigtige stik.
Loading ...
Loading ...
Loading ...