Intex 28635EG - Krystal Clear Cartridge Filter Pump

User Manual - Page 6

For 28635EG. Also, The document are for others Intex models: 635T

PDF File Manual, 17 pages, Read Online | Download pdf file

28635EG photo
Loading ...
Loading ...
Loading ...
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/22/2016
107
SAVE THESE INSTRUCTIONS
English
Page 6
The strainer grid prevents large objects from jamming and/or damaging the filter pump.
The plunger valve assembly prevents water from flowing into the filter pump while the
filter cartridge is being placed or cleaned. If your pool has inflatable top ring, install the
strainer, nozzle and plunger valve before inflating the pool liner top ring. The parts
numbers here onward, refer to the parts depicted in the Parts List section of this manual.
To install, do the following:
1.
In a counter-clockwise motion unscrew
plunger valve union from the threaded
strainer connector
(13)
(see drawing 1).
Be careful not to lose the step rubber
washer
(10)
. Place the plunger valve on
the ground in a safe place.
2.
In a counter-clockwise motion unscrew the
strainer nut
(11)
from the threaded
connector
(13).
Leavetheflatwasher
(12)
on the connector
(13)
.
3.
Install the strainer and plunger valve at the
lowerpositionofpooloutlet(marked"+").
From the inside of the pool liner insert the
connector
(13)
into one of the pre-cut holes
with the washer remaining on the
connector to be placed against the inside
of the liner wall.
4.
Before assembly, lubricate the threads with
a petroleum jelly. Then, with the flat side of
the strainer nut
(11)
facing the outside wall
of the liner in a clockwise motion screw the
strainer nut
(11)
back onto the threaded
connector
(13) (see drawing 2)
.
5.
Finger tighten the strainer nut
(11)
onto
the threaded connector
(13)
.
6.
Grasptheplungervalveassembly.Make
sure the step washer
(10)
is in place.
7.
In a clockwise motion screw the plunger
valve union
back onto the threaded
connector
(13) (see drawing 3)
.
8.
In a clockwise motion turn the plunger
valve handle to close position. Ensure the
plunger valve is securely closed. This will
prevent water from flowing out during filling
of the pool
(see drawings 4)
.
POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional)
2
12
13
INSIDE
LINER WALL
11
1
2
1
3
1
2
4
INSIDE
LINER WALL
Loading ...
Loading ...
Loading ...