Loading ...
Loading ...
Loading ...
(107) MODEL 635T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/22/2016
107
SAVE THESE INSTRUCTIONS
English
Page 10
1.
Makesurethefilterpumpisswitchedoff.Theswitchislocatedonthemotorhousing.
2.
ConnectthepowercordtoaGFCIprotectedelectricaloutlet.
3.
Turn both plunger valve handles fully counter-clockwise until they stop. This opens the
valve, allowing water to flow into the filter pump.
4.
Withwaterflowingintofilterpump,thewaterpressurewillallowtheairtrappedinsideto
escape from the air release valve
(2).
Whenalltheairhasescapedwaterwillflowoutof
the valve
(2).
Whenthisoccursgentlyfingertightenthevalve
(2)
in a clockwise direction.
5. To operate the filter pump on “TIMER” mode:
A. Setthetimerdialtothedesiredoperatinghours.Seeoperationtimetable.
SeeFig.10
B. Turn on the pump by pressing the switch to “ ” position, the filter pump is now
filtering the water and will stop after the operating hours are completed. The built-in
timer will now operate for the number of hours selected at the same time each day.
C.Operatinghourscanbere-adjustedifnecessary.FollowstepA–B.
To operate the filter pump manually (without the “TIMER” mode):
A. Turn on the pump by pressing the switch to “-” position, the filter pump is now filtering
the water.
B. Toturnoffthepump,presstheswitchto“O”position.
OPERATING INSTRUCTIONS
Risk of electric shock. Connect this product only to a grounding type receptacle
protected by a ground-fault circuit interrupter (GFCI). Contact a qualified electrician
if you cannot verify that the receptacle is protected by a GFCI.
WARNING
To prevent air lock, open the lower plunger valve (connected inlet hose) first and
then the upper plunger valve (connected outlet hose). Open the air release valve,
wait until water starts to flow out of the air release valve, close air release valve.
IMPORTANT
2
4
6
8
12
ON
OFF
TIMER
FIG 10
TIMER DIAL (HOURS)
6.
Neverputpoolchemicalsdirectlyintothefilterpump.Thismaydamagethepumpand
void the warranty.
Loading ...
Loading ...
Loading ...