Loading ...
Loading ...
Loading ...
9
Technical Data
Rated Voltage ..................................................... 120 V ~ 60 Hz
Motor .................................................... 13 A (Pressure washer)
5.7 A (Vacuum system)
Max Pressure at initial discharge ................................ 2000 PSI
per CSA internal pressure testing
Rated Pressure under typical load ............................. 1500 PSI
Max Flow with nozzle open ...................................... 1.95 GPM
at minimum pressure
Rated Flow under typical load .................................... 1.1 GPM
Max Water Inlet Temperature ................................. 104ºF/40ºC
Max Water Inlet Pressure ............................................ 0.7 MPa
Foamer Cannon Capacity .................................... 10 oz (0.3 l)
High-pressure Hose Length ...................................... 20 ft (6 m)
Power Cord Length .............................................. 35 ft (10.7 m)
Air Flow Max ........................................................... 49.4 ft
3
/min
(1.4 m
3
/min)
Working Air Pressure ...................................................... 16 kPa
Telescopic Handle Length ................................. 23 inch - 27.8"
(58.4 cm - 70.7 cm)
Suction Hose Length ............................................. 1.6 ft - 6.6 ft
(0.5 m- 2 m)
Filtration .................................................................... HEPA lter
Dust Tank Capacity .............................................. 0.4 gal (1.5 l)
Weight (no attachments) ..................................... 17 lbs (7.8 kg)
Unpacking
Carton Contents
• Electric pressure washer + Wet/dry vacuum
• Wheels (2)
• Spray wand
• Trigger gun
• Needle clean-out tool (included with manual packet)
• High-pressure hose
• Garden hose adapter (female coupler)
• 1.6 ft wet/dry vacuum hose
• All purpose nozzle
• Crevice nozzle + dusting brush
• Manuals with registration card
1. Carefully remove the pressure washer + wet/dry vacuum
and check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer + wet/dry vacuum. The packaging is
made of recyclable materials. Properly dispose of these
materials in accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation
risk!
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Attach the Wheels
1. Fit one wheel onto the left end of the wheel axle, and
press rmly until it clicks into place (Fig. 1).
2. Repeat to assemble the other wheel.
Connect as Pressure Washer
1. Fit the spray wand into the gun and rotate it until the two
parts are completely locked (Fig. 2).
Fig. 1
Wheel Wheel axle
Loading ...
Loading ...
Loading ...