Loading ...
Loading ...
Loading ...
10
2. Connect the silver end of the high-pressure hose to the
trigger gun and twist the nut clockwise to secure the
connection (Fig. 3).
3. Connect the other end of the high-pressure hose to the
water outlet on the washer and twist the black rotatable
end-piece to secure the connection (Fig. 4).
mWARNING! Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
4. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Fig. 5). The garden hose must have an internal diameter
of at least 13 mm (1/2 in.) and must be reinforced. The
water supply must be at least equal to the washer delivery
capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
5. Attach garden hose to water supply (Fig. 6).
Connect as Vacuum/Blower
mWARNING! Make sure the unit is not connected to
power and is switched o before assembly.
1. To use the tool as a vacuum, insert the vacuum tube into
the air inlet, and twist clockwise to secure (Fig. 7).
Fig. 2
Trigger gunSpray wand
Fig. 3
Trigger gun
High-pressure
hose
Fig. 4
Water outlet
High-pressure hose
Fig. 5
Garden hose adapter
(female coupler)
Garden hose
This end to
water inlet
Garden hose
(male end)
Water inlet
Fig. 6
Connect to water supply
Garden hose
Loading ...
Loading ...
Loading ...