Loading ...
Loading ...
Loading ...
Other Settings
This section explains other watch settings you
can configure.
Getting Ready
Enter the Timekeeping Mode.
l
Navigating Between Modes
Switching between 12-hour
and 24-hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1. Hold down (A) for about two seconds until
[HT] flashes.
2. Press (C) eight times.
This causes [12H] or [24H] to flash on the
display.
3. Press (D) to toggle the setting between
[12H] (12-hour timekeeping) or [24H] (24-
hour timekeeping).
24-hour timekeeping12-hour timekeeping
4. Press (A) to exit the setting screen.
Changing the Date Display
Format
You can select either month/day or day/month
as the date display format.
1. Hold down (A) for about two seconds until
[HT] flashes.
2. Press (C) nine times.
This causes [M.DD] or [DD.M] to flash on
the display.
3. Use (D) to select either [M.DD] (month/
day) or [DD.M] (day/month).
4. Press (A) to exit the setting screen.
Specifying the Day of the
Week Language
You can select any one of six languages for
the day of the week display in the Timekeeping
Mode.
1. Hold down (A) for about two seconds until
[HT] flashes.
2. Press (C) 10 times.
This causes the language setting to flash.
3. Use (D) to select a language.
[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian
4. Press (A) to exit the setting screen.
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1. Hold down (A) for about two seconds until
[HT] flashes.
2. Press (C) 11 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
3. Use (D) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
4. Press (A) to exit the setting screen.
Note
●
Note that alarm and timer tones will still
sound even while the operation tone is
muted.
Operation Guide 3459/3461
16
Loading ...
Loading ...
Loading ...