Loading ...
Loading ...
Loading ...
Configuring Alarm Settings
1. Use (D) to display the alarm screen (alarm
number [1] to [4] or [SNZ]) whose setting
you want to change.
Alarm time
Alarm number
2. Hold down (A) for about two seconds.
This causes the hours digits to flash.
Hours
3. Use (D) and (B) to change the hour setting.
●
If you are using 12-hour timekeeping,
[P] indicates p.m.
4. Press (C).
This causes the minutes digits to flash.
Minutes
5. Use (D) and (B) to change the minute
setting.
6. Press (A) to exit the setting screen.
7. Press (C) three times to return to the
Timekeeping Mode.
Note
●
You can also use G-SHOCK
Connected to configure alarm time
settings.
Enabling/Disabling an Alarm
or the Hourly Time Signal
1. Use (D) to display the item whose on/off
setting you want to change: alarm number
[1] to [4] or [SNZ], or the hourly time signal
([SIG]) screen.
Alarm or hourly time signal
2. Press (A) to toggle the displayed alarm or
the hourly time signal between on and off.
Stopping an Alarm
Pressing any button while the beeper is
sounding stops it.
Determining an Alarm’s
On/Off Status
Turning on an alarm or the hourly time signal
causes the corresponding indicator to appear
on the display.
Snooze
Hourly time signal
Alarm
Stopwatch
The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59 seconds (24
hours).
Getting ready
Enter the Stopwatch Mode.
l
Navigating Between Modes
Measuring Elapsed Time
1. Use the operations below to measure
elapsed time.
D
D
D
D
Stop
Resume
Stop
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Hour, minute, second
After first hour
Minutes, seconds,
1/100 seconds
First hour
2. Press (A) to reset the elapsed time to all
zeros.
Operation Guide 3459/3461
13
Loading ...
Loading ...
Loading ...