Loading ...
Loading ...
Loading ...
Measuring a Split Time
1. Use the operations below to measure
elapsed time.
●
Each press of (D) causes the elapsed
time up to that point (split time) to be
indicated.
D
A
A
D
Stop
Split release
Split
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Hour, minute, second
After first hour
Minutes, seconds,
1/100 seconds
First hour
2. Press (A) to reset the elapsed time to all
zeros.
Timing the First and Second
Place Finishers
1. Use the operations below to measure
elapsed time.
D
A
D
2nd Finisher*
1st Finisher*
Start
* This displays the time of the first
finisher.
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Hour, minute, second
After first hour
Minutes, seconds,
1/100 seconds
First hour
2. Press (A) to display the time of the second
finisher.
3. Press (A) to reset the elapsed time to all
zeros.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper is muted in the cases described
below.
ー
When battery power is low
Getting Ready
Enter the Timer Mode.
l
Navigating Between Modes
Setting the Time
The countdown start time can be set in 1-
second units up to 24 hours.
1. Hold down (A) for about two seconds.
This causes the hours digit to flash.
Hours
2. Use (D) and (B) to change the timer hours
setting.
3. Press (C).
This causes the minutes digits to flash.
Minutes
4. Use (D) and (B) to change the timer
minutes setting.
5. Press (C).
This causes the seconds digits to flash.
Seconds
6. Use (D) and (B) to change the target time
seconds setting.
7. Press (A) to exit the setting screen.
Note
●
You can also use G-SHOCK
Connected to configure timer settings.
Operation Guide 3459/3461
14
Loading ...
Loading ...
Loading ...