Loading ...
Loading ...
Loading ...
7
Operation
Cutting Depth Adjustment
The front guide wheel can be adjusted to allow a deeper or
shallower cut, and to increase the life of the blade. The edger
can be adjusted to edge at three dierent depths.
mDANGER! Risk of personal injury. Never attempt to
adjust the depth while the edger is running. Always unplug
edger before making any adjustments.
1. To adjust the depth of the cut, loosen the height
adjustment knob on the front of the edger + trencher
(Fig. 5).
2. Push front guide wheel to the left, then raise or lower the
arm to the desired depth setting (Fig.6).
3. Push in the front guide wheel arm, check to ensure the
front guide wheel arm has located into any of the pre-
allocated positions. Ensure the head of the bolt securing
the front guide wheel arm is resting at on the surface of
the wheel arm (Fig. 7).
4. Retighten the height adjustment knob securely (Fig. 7).
Operation
Securing the Extension Cord
1. Make a loop with the extension cord (Fig. 8).
2. Insert the loop through the opening in the back of the
handle (Fig. 8).
Fig. 5
Height
adjustment
knob
Fig. 6
Push to the left
then adjust up
or down
Front guide
wheel arm
Fig. 7
Height
adjustment
knob
Fig. 8
Extension cord
Handle
Loading ...
Loading ...
Loading ...