Loading ...
Loading ...
Loading ...
11
Assemble as a Vacuum/Mulcher
1. Slide the front and rear vacuum/mulcher tubes together
until the locking tabs on both sides engages (Fig. 8).
2. Press inlet cover lock button forward to disengage the
inlet cover. Hold the cover open (Fig. 9).
3. With the blower tube removed, insert the "wedged" end of
the mulcher tube into the slot on the unit. Securely fasten
the mulcher tube by pushing the 2 tabs on the mulcher
tube until they snap into the holes on the housing (Fig. 10).
4. Insert the collection bag adaptor into the air outlet until
the collection bag is securely fastened, then clip the bag
to the strap holder (Fig. 11). Simply press the tube release
button to remove the bag (Fig. 12).
5. To remove the vacuum/mulcher tube assembly, press the
inlet cover lock button to unlock, then remove the tube
assembly from its housing (Fig. 13).
NOTE: It may be necessary to remove the blower tubes or
vacuum/mulcher tubes to clear a blocked tube or impeller.
Make sure to remove the batteries before attempting to
clear any obstructions.
Fig. 8
Rear vacuum tubeFront vacuum tube
Locking tab
Fig. 9
Inlet cover
lock button
Inlet cover
Fig. 10
Wedged end
Tabs
Slot
Vacuum tube
R
Fig. 11
Collection bag
Air outlet
Collection
bag adaptor
Strap holder
R
Fig. 12
Tube release
button
Fig. 13
Inlet cover lock button
Vacuum tube
Loading ...
Loading ...
Loading ...