Loading ...
Loading ...
Loading ...
50
Below is a screenshot of the Alarm menu:
Below is a description of the options in this menu:
Enable: Use this checkbox to enable relay activation.
Relay-in: The default alarm type will be Alarm 1.
Schedule: Allows the user to set a schedule in which the alarm will be triggered.
Anti-Dither: This field allows the user to set the anti-dither time. The values in this field can range from 5 to 600
seconds. This time value controls how long the alarm signal lasts. Based on motion detection, a buzzer can go off, a
tour can begin, a snapshot can be taken, or the camera can begin recording.
For example, if the anti-dither time is set to 10 seconds, each alarm may last 10 seconds if the local alarm is
activated. During the process, if the system detects another local alarm signal at the fifth second, the buzzer, tour,
snapshot, record channel functions will begin another 10 seconds while the screen prompt, alarm upload, email
will not be activated again. After 10 seconds, if system detects another alarm signal, it can generate a new alarm
since the anti-dither time has expired.
Sensor Type: Use this dropdown menu to choose different sensor types:
NO: Stands for normally open, which leaves the alarm open.
NC: Stands for normally closed, which leaves the alarm closed until activated.
Record: This checkbox allows the user to enable the camera to record video when an IVS event is triggered.
Record Delay: This field specifies, in seconds, how long the delay between IVS events should be. The default is 10
seconds however this can be modified between 10~300 seconds.
Loading ...
Loading ...
Loading ...