Amcrest IP8M-T2699EW-AI UltraHD 4K (8MP) AI Outdoor Security Turret POE IP Camera

User Manual - Page 49

For IP8M-T2699EW-AI. Also, The document are for others Amcrest models: IP8M-T2669EW-AI, IP8M-T2699EB-AI

PDF File Manual, 74 pages, Read Online | Download pdf file

IP8M-T2699EW-AI photo
Loading ...
Loading ...
Loading ...
49
Below is a description of the options in this menu:
Enable: Use this checkbox to enable Smart Motion Detection.
Effective Object: The object filter checkboxes allow the camera to be triggered only when a specific object, such as
a human or car, is detected by the camera. Both effective object checkboxes can be activated at the same time.
Human: This checkbox allows the camera to be triggered only when a human figure is detected.
Motor Vehicle: This checkbox allows the camera to be triggered only when a vehicle has been detected.
Sensitivity: Use this dropdown menu to select a sensitivity setting for smart motion detection. The sensitivity can
be set as low, medium, or high.
Record: This checkbox allows the user to enable the camera to record once an event is detected.
Record Delay: This field specifies, in seconds, how long the delay between events should be. The default is 10
seconds however this can be modified between 10~300 seconds.
Relay Out: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the
alarm port on the back of the camera) when a motion detection alarm is triggered.
Alarm Delay: This field specifies in seconds how long the delay between alarm activation and Relay alarm
activation should be.
Send Email: This checkbox allows the user to enable the camera to send an email when an IVS event is triggered.
Snapshot: This checkbox allows a snapshot of the IVS event to be sent via Email when triggered.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
Alarm
The Alarm menu allows the user to configure an external alarm to the camera. An external alarm can be connected
to the alarm connections which can be found on the dongle wire connections on the camera. If connecting an
external alarm to the camera, please refer to the specific user manual for the alarm as we do not provide third
party support for third party external alarms.
Loading ...
Loading ...
Loading ...