Loading ...
Loading ...
Loading ...
NOTE:
Perform the following procedure to
store the EVSE in the case.
1. Wind the charge cable into a size that will
allow it to be stored in the case (approxi-
mately 14 in (36 cm) in diameter). Winding
the charge cable in the direction shown
above avoids shortening of cable life.
2. Place the EVSE into the case.
3. Pass the lower side belt from the case
through the fastener on the bottom of
the luggage board
O
C
.
4. Hang the hook
O
D
from the case to the
ring from the trim.
5. Fix the belt
O
E
with the hook-and-loop
fastener on the case, pulling the belt
from the case.
WARNING
Pass the lower side belt of the EVSE
case securely through the fastener on
the bottom of the luggage board. If the
case suddenly becomes loose, it may
cause serious injury or death.
1. After closing the cap on the charge port,
close the charge port lid.
LCH2139 LCH2137 LCH2206
Charging CH-25
Loading ...
Loading ...
Loading ...