Loading ...
Loading ...
Loading ...
8
|
Sub-Zero Customer Care 800.222.7820
INSTALLATION
Installation
VERIFY ICE PRODUCTION
1 Press ‘POWER’ to turn the ice machine on.
2 Add one gallon (3.8 L) of cold water to the ice bin. Verify
the water completely drains from the ice bin and there
are no leaks. If the water has not drained within 60 sec-
onds, there may be a kink in the drain tube or incorrect
drain installation.
3 Press ‘CLEAN’. Wait three minutes until the CLEAN light
ashes, then add 1 tablespoon
(15 ml) of undiluted ice
machine sanitizer directly into the spray area. Refer to
the illustration below. Use only the sanitizer made for the
Sub-Zero ice machine available at subzerowolfstore.com.
For questions, contact Sub-Zero customer care at
800-222-7820.
Water shutters location.
WATER
SHUTTERS
4 A 10-minute sanitizing cycle begins, followed by eight
rinse cycles. When the process is complete, the CLEAN
light will no longer be illuminated. The entire cycle takes
approximately 30 minutes.
5 At initial start-up, the ice machine will need approxi-
mately 30 minutes to freeze ice cubes and up to ve
minutes to harvest. Verify completion of the rst cycle ice
production to conrm proper installation.
Loading ...
Loading ...
Loading ...