Loading ...
Loading ...
Loading ...
Installation
2
Franke recommends the installer familiarize themselves with how this dispensing faucet will
be installed and function as part of a point-of-use hot water, a filtration only drinking water,
or a combination hot and filtered point-of-use water dispensing arrangement BEFORE the
products are installed. Make certain to observe all local plumbing and building codes during
installation of this unit.
It is important to identify the dispenser to be installed as this guide applies to multiple
configurations. The hot water dispensing faucets are part of the Little Butler® Series.
There are 2 different styles of Little Butler® Series dispensers available:
The LB_200 Series dispensers offer hot and filtered water separately. These dispensers
must be used in conjunction with both a Franke heating tank unit and a Franke filtration
system. They utilize 4 tubes to connect to the system.
• 2 blue poly-tubes for the cold water supply into the dispensing faucet, which comes
from the filtration system.
• 1 red poly-tube to carry the filtered water from the dispensing faucet to the heating
tank unit.
• 1 opaque high temperature silicone tube to carry the heated water from the heating
tank back to the dispensing faucet.
The LB_100 Series dispensers offer hot water only. These dispensers are required to be
used in conjunction with a Franke heating tank unit. Use of a Franke filtration system in
addition to the heating tank is optional, but strongly recommended in order to prolong the
life and improve the performance of the heating tank, as well as providing much higher
quality water as compared to un-filtered water entering the tank. These models utilize 3
tubes to connect to the system.
• 1 black poly-tube for the cold water supply to the dispensing faucet, which
must come from the home water supply or from the filtration system (if utilized).
• 1 red poly-tube to carry the filtered water from the dispensing faucet to the heating
tank unit.
• 1 opaque high temperature silicone tube to carry the heated water from the heating
tank back to the faucet.
The filtered water only dispensing faucets are part of the Drinking Water Series, which are
designated as DW_ _00 models. These dispensing faucets will only be used in conjunction
with a Franke filtration system. There will only be one black poly-tube to connect the faucet
to the filtration system.
IMPORTANT: Customer MUST USE genuine Franke components (see below) in tandem
with all Franke dispensing faucets. Use of any filtration products, heating tanks, or
service parts other than genuine Franke components will VOID THE PRODUCT
WARRANTY in its entirety. Use of any Franke dispensing faucet with a Reverse
Osmosis Filtration system will also VOID THE PRODUCT WARRANTY.
3
Franke HT-200
Heating Tank
Franke FRCNSTR100
Filtration System
Franke FRCNSTR
Filtration System
Loading ...
Loading ...
Loading ...