Loading ...
Loading ...
Loading ...
Page 4
22.
A motor powers the flame effect, and it is normal for the motor to make some noise as it slowly
rotates and creates the beautiful 3D flame effect.
23.
Every effort is made to ensure packing materials are kept outside of the plastic bag, which
covers your heater in the box. There is a chance that some packing may lodge itself into the
heater part of the unit. If you notice this upon close inspection, please remove it before turning
the heater on. When turning your heater on for the first time it is normal for the heater to emit
a little ‘new heater’ smell, which will quickly pass.
24.
You may notice some light coming from underneath, or from the sides, of the unit. This is
normal and the holes allow the unit to ‘breathe’. Do not block these holes.
25.
This heater is only to be used on a 110-120-volt, 15-amp, grounded circuit. Do not use in an
outlet controlled by a switch or dimmer switch. The cord supplied with the heater has a 3-prong
plug. The round pin on the plug is for grounding purposes. If a 3-prong outlet is not available,
an adapter must be used, and the adapter must be properly grounded to an outlet box. Do not
plug any appliances into the same circuit as the heater.
-Save These Instructions-
Loading ...
Loading ...
Loading ...