Loading ...
Page 2
Quick Reference Guide:
1. Prior to plugging your heater into a convenient outlet, first verify that the circuit breaker for
the outlet is on.
2. The heater may emit a slight harmless odor when first used. This odor is normal and is caused
by the initial heating of the internal heater parts, but will not occur again.
3. If the heater does not emit any heat, please consult the manual for further instructions.
CAUTION:
- RISK OF ELECTRIC SHOCK
- DO NOT OPEN
- THERE ARE NO SERVICEABLE PARTS INSIDE (EXCEPT FOR THE LIGHT BULBS)
- HIGH TEMPERATURE WHEN IN USE
- KEEP ELECTRICAL CORDS, DRAPERY, AND ALL FURNISHINGS, AT LEAST
THREE INCHES FROM THE FRONT, AND SIDES, OF THE HEATER AT ALL TIMES
WARNING:
- RISK OF FIRE
- KEEP COMBUSTIBLE MATERIAL AWAY FROM THE FRONT OF HEATER
- SERVICING SHOULD ONLY BE DONE WHEN THE HEATER IS UNPLUGGED
FROM THE POWER SUPPLY
CAUTION WHEN CHANGING LIGHTBULBS
REPLACE ONLY WITH E12 CLEAR, SCREW FITTING, WITH A RATING OF 110-120 /
40-WATT MAXIMUM
Lightbulbs are not covered under this warranty
Loading ...
Loading ...
Loading ...