Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
Problem Possible Cause Possible Solution
•Unitwillnotstart. •Batterypacknotcharged. •Checkbatterypackcharging
requirements.
•Batterypackwillnotcharge.•Chargernotpluggedin. •Plugchargerintoaworkingoutlet.
Refer to “Important Charging Notes” for
more details.
•Surroundingairtemperature•Movechargerandbatterypacktoa
too hot or too cold. surrounding air temperature of above
40 degrees F (4.5°C) or below
105 degrees F (+40.5°C).
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK+DECKER help line at
1-800-544-6986.
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this tool could
be hazardous.
RBRC SEAL
TM
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the
lithium-ionbattery(orbatterypack)indicatesthatthecoststorecyclethe
battery (or battery pack) at the end of its useful life have already been paid
by BLACK+DECKER.Insomeareas,itisillegaltoplacespentlithium-ion
batteries in the trash or municipal solid waste stream and the RBRC program
provides an environmentally conscious alternative.
RBRC in cooperation with BLACK+DECKER and other battery users, has established
programsintheUnitedStatesandCanadatofacilitatethecollectionofspentlithium-ion
batteries. Help protect our environment and conserve natural resources by returning the
tool to an authorized BLACK+DECKER service center for recycling. You may also contact
your local recycling center for information on where to drop off the spent battery, or call
1-800-8-BATTERY.
ThisClassBdigitalapparatuscomplieswithCanadianICES-003.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiver is connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This Class B
digitalapparatuscomplieswithCanadianICES-003.
8
Loading ...
Loading ...
Loading ...