Loading ...
Loading ...
Loading ...
- 5 -
MAINTAINING THE DUST CONTAINER AND FILTERS
( PERIODIC MAINTENANCE IS REQUIRED TO MAINTAIN OPTIMUM PERFORMANCE)
Remove the pre motor filter from inside
the separator and tap to remove any
excess dirt from the filter, it is also
recommended to clean the separator.
Once dirt is removed the filter can be
rinsed under the tap.
The pre-motor filter should be washed
after every five bin empties. Wash under
hand warm water. Remove excess water
and leave to dry for 24 hours.
When completely dry, refit the filter.
Cleaning the Exhaust Filter
Cleaning the Separator
Underneath the dust container you can
find the exhaust filter.
Lift to remove the exhaust filter.
Remove any dirt/debris by rinsing under
water(Max 40°C)
Leave to dry for 24 hours or until fully dry
before replacing back into the cleaner.
IMPORTANT: Do not operate your cleaner
without either the dust container or filters
in the right place.
Hold the container lid and rotate the
separator in an anti-clockwise direction
to release.
Turn the dust container lid anti-
clockwise to unlock and lift to take
out.
Turn the separator anti-clockwise
to remove from the dust container
lid.
Tap separator over a bin to
remove any dirt/debris.
Using a soft brush clean any dirt/
debris out of the separator.
Refit the container top.
Please pay attention to alignment
tab.
Twist the top part of the container
whilst holding the lower part to
lock together.
Remove the dust container as described
on the previous page.
Hold the dust container lid and with the
other hand rotate the container in a anti-
clockwise direction to release.
<40
<40
<40
<40
<40
<40
<40
<40
Loading ...
Loading ...
Loading ...