CFP301 OWNER’S GUIDE

Loading ...

ENGLISH

16 17

1-877-646-5288

ninjakitchen.com

PREPARING & USING

THE NINJA

HOT & COLD BREWED SYSTEM™

SIGNATURE BREW

SPECIALTY BREW

1 After ﬁlling the water reservoir,

insert either the COFFEE or TEA

ﬁlter holder into the brew basket.

Add the ground coee, loose leaf

tea, or tea bags to the ﬁlter.

2 Close the brew basket, ensuring

it is securely in place.The control

panel will display either COFFEE

(Fig. 14a) or TEA (Fig. 14b) settings

based on the ﬁlter holder that has

been inserted.

3 Place the empty vessel you would like

to brew into under the brew basket.

4 Turn the START/SELECT dial to

choose SPECIALTY (Fig. 17). If

brewing tea, press the Tea button

to toggle to the tea menu, and

use the dial to choose your tea

type. To change your brew style

while in the tea menu, press the

Tea button

again.

5 Press the START/SELECT dial to

start the brew. A progress bar on the

control panel will show the status

of the brewing cycle. To cancel the

brew at any time, press the dial again

or press the Power button.

6 The unit will beep and the clock

will display End when the brew

is complete.

SETTING THE DELAY BREW

1 Turn the unit on by pressing the

Power button.

2 After ﬁlling the water reservoir and

adding ground coee or tea to the

correct ﬁlter holder, be sure the

reservoir, brew basket, and ﬁlter

are securely in place. Place the

appropriate-size vessel under

brew basket.

NOTE: The brewing cycle will begin,

then pause for a short period before

resuming. This process is used to evenly

saturate the coee grounds or tea.

NOTE: Specialty always yields 4 oz.

of coee and 6 oz. of tea (with the

exception of Green tea, which

yields 2 oz.).

NOTE: The unit must remain on for the

Delay Brew function to work. DO NOT

power o after setting Delay Brew.

NOTE: If brewing an iced blended

drink, ﬁll the desired vessel with the

amount of ice recommended in the

recipe before brewing.

NOTE: The clock will remain on even if

the unit is turned o. Ensure the unit is

powered on to set Delay Brew.

3 Fill your desired vessel to the top with

ice cubes and place the vessel below

the brew basket. Use the Multi-Serve

dial to select the brew size.

4 Turn the START/SELECT dial to

choose either Over Ice Brew or Cold

Brew (Fig. 16a, Fig. 16b). If brewing

tea, press the Tea button

to toggle

to the tea menu, and use the dial to

choose your tea type. To change your

brew style while in the tea menu,

press the Tea button

5 Press the START/SELECT dial to

start the brew. A progress bar on the

control panel will show the status of

the brewing cycle. To cancel the brew

at any time, press the dial again or

press the Power button.

6 The unit will beep and the clock will

display End when the brew is complete.

OVER ICE BREW & COLD BREW

IMPORTANT:

DO NOT USE GLASSWARE.

However, the provided Ninja®

glass carafe is safe to use due

to its specialized glass material.

1 After ﬁlling the water reservoir,

insert either the COFFEE or TEA

ﬁlter holder into the brew basket.

Add the ground coee, loose leaf

tea, or tea bags to the ﬁlter.

2 Close the brew basket, ensuring

it is securely in place. The control

panel will display either COFFEE

(Fig. 14a) or TEA (Fig. 14b)

settings based on the ﬁlter holder

that has been inserted.

PREPARING & USING

THE NINJA

HOT & COLD BREWED SYSTEM™

NOTE: For COLD BREW coee ONLY,

add an additional scoop of coee

grounds to the brew basket.

NOTE: Cold Brew takes about 15

minutes for a Full Carafe.

Fig. 16a Fig. 16b Fig. 17

CP307 P4 BACKLIT UI LAYOUT

2017.12.21

CP307 P4 BACKLIT UI LAYOUT

2017.12.21

NOTE: DO NOT add ice to the

water reservoir.

NOTE: The brew basket must be

securely closed with either the COFFEE

or TEA ﬁlter inserted to set Delay Brew.

CP307 P4 BACKLIT UI LAYOUT

2017.12.21

Loading ...

OWNER’S GUIDE - Page 18