Loading ...
Loading ...
Loading ...
OPERATION INSTRUCTIONS
Full-Automatic Programming
This function is used to cook after a certain period of time, for a set amount of time. Food
is placed into the oven, and a Cooking Function and Oven Temperature is selected.
1.) Press “ “ button until you see “ dur “ on the digital display. Use “ + “ “ – “ Buttons to
select the cook time. Press “ “ Button to confirm, the time will appear on the digital
display, and the “ A “ Symbol will light on the display.
2.) Keep pressing “ “ Button until you see “ End “ on the digital display; use “ + “ “ – “
Buttons to select the cook time, press “ “ Button to confirm, the Time will appear and
the “ A “ Symbol will light on the digital display. The Symbol “ “ disappears until the
cook time starts.
You can set a time which can be up to 23 Hours and 59 Minutes (24-Hour Clock), or 12
Hours and 59 Minutes (12-Hour Clock) after the time obtained by adding the cooking pe-
riod to the day’s time.
The oven will start operating at the time calculated by deducting the cooking period from
the set finishing time, and will stop at the set finishing time. The Timer will give an audi-
ble alert and the Symbol “ A “ will flash. After bringing the Cooking Function and Oven
Temperature to the “ “ position, press any button for less than 3 seconds to stop the
audible alert.
Pressing “ “ for more than 3 seconds will enable Manual Mode again.
NOTE: Once setting Full-Automatic Mode, the Clock cannot be changed. To change the
Clock’s time, you must cancel the Full-Automatic Mode and enter Clock Setup.
NOTE: If you need to reset Full-Automatic Mode, need to stop setting the current mode,
to set the Full-Automatic Mode according to the above steps again.
Specification
1.) When setting the date of each function, Press either “ + “ or “ – “ for more than 3 sec-
onds; the date will progressively and rapidly increase or decrease.
2.) When setting each of the time function, if there is no operation for 5 minutes, it will re-
turn to Manual Mode.
3.) When setting each of the time function, press on “ “ for more than 3 seconds can
cancel the current setting and enter manual mode.
4.) During time function setting, pressing on “ + “ and “ “ for more than 3 seconds, an
audible alert will sound, the current time function is canceled, and oven enters Standby
Mode.
5.) It is highly recommended to run the oven empty for 15 minutes at 390 °F to burn off
any interior residue.
12
Loading ...
Loading ...
Loading ...