Loading ...
Loading ...
Loading ...
22 23
ninjakitchen.eu
VACUUM BLENDING
WITH YOUR SINGLE-SERVE FRESHVAC™ CUP - CONT.
IMPORTANT: Review all warnings
on pages 2-5 before proceeding.
10 Place the unplugged motor base
on a clean, dry, and level surface
such as a worktop or table. Press
downward on the motor base to
adhere the suction cups to the
work surface. Plug the motor
base into a socket.
11
Turn the Single-Serve Cup upside
down and install on the motor base.
Align the tabs on the cup with the
slots on the base, then twist until it
clicks into place. Press the Power
symbol to turn unit on. The available
program buttons will illuminate and
the unit will be ready for use.
NOTE: Pre-set programs have pauses
and changes in speed throughout
the cycle.
NOTE: The unit can detect which
container is on the motor base. Only
the functions available for a particular
container will illuminate on the
touchscreen.
12 If using a pre-set program, first
select the program that best suits
your recipe. The pre-set feature will
automatically stop the unit at the end
of the program. To pause the unit at
any time, press the currently active
program a second time. Reference
page 10 for program descriptions.
15
Turn the cup over so the blade
assembly is on top. Rotate the
blade assembly anti-clockwise
to remove. To take your blended
contents on the go, place the spout
lid on cup and turn clockwise to
seal.
16
Unplug the unit when finished.
To lift the motor base, place your
hands underneath both sides of
it and gently pull the unit up and
towards you. Refer to the Care &
Maintenance section for storing
instructions.
TIPS:
• To learn more about the programs
that work with your Single-Serve
Cup, refer to page 10.
13 When blending is complete, rotate
cup anti-clockwise to remove from
motor base and place cup on a
level surface. Pressure must be
released before opening the cup.
The FreshVac Cup may be stored
in the fridge with the spout lid for
later use. DO NOT store contents
in the cup with the Pro Extractor
Blades Assembly attached.
14
Open the Flip & Seal Lid by
pressing the tab and lifting. To
release the vacuum seal, gently lift
the FreshVac Tab. Pressure will be
released from the cup, making it
easy to remove the blade assembly.
SINGLE-SERVE FRESHVAC™ CUP
WITH FLIP & SEAL LID.
IMPORTANT:
Do not pull the tab out.
Loading ...
Loading ...
Loading ...