Greenworks 5104507 Cordless High-Pressure Cleaner GDC40 (Li-Ion 40V 650 Watts Motor Power 70 bar Pressure 300 l/h Flow Rate 20 l Tank 6 m Hose Without Battery and Charger)

User Manual - Page 5

For 5104507.

PDF File Manual, 180 pages, Read Online | Download pdf file

5104507 photo
Loading ...
Loading ...
Loading ...
WARNING
Do the instructions on the solution bottle to prepare
detergent.
NOTE
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
1. Put the detergent into the detergent tank.
2. Push and hold the lock button on the spray wand.
3. Install the detergent tank onto the spray wand.
NOTE
Do not let detergent dry on the surface to prevent streaks.
4.4 START THE MACHINE
Figure 13.
CAUTION
Do not operate without the water supply connected.
CAUTION
Before you start the machine:
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water come into view, release the
gun trigger.
1. Set the power switch to the “ON” ( | ) position.
2. Pull the gun trigger.
4.5 STOP THE MACHINE
1. Release the gun trigger.
2. Set the power switch to the "OFF" (O) position.
WARNING
If you do not use the machine
Stop the machine.
Turn the water supply off.
Remove the battery pack.
Pull the gun trigger to release the remaining pressure
from the machine.
Lock the trigger safety button.
5 MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
5.1 NOZZLE MAINTENANCE
Figure 10.
If there is too much pump pressure, the nozzle can become
clogged, you can feel a pulsing sensation while you pull the
gun trigger.
5.1.1 REMOVE THE NOZZLE
1. Push and hold the lock button on the spray wand.
2. Remove the nozzle from the spary wand.
5.1.2 CLEAN THE NOZZLE
1. Use a straight paper clip or cleaning tool to clean the
spray tip.
2. Flush and clean the unwanted materials out of the nozzle
with the garden hose.
3. Install the clean nozzle to the spray wand.
6 TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before
tranportation and storage.
6.1 MOVE THE MACHINE
Point the spray wand in a safe direction.
Only hold the machine with the handgrip.
6.2 STORE THE MACHINE
WARNING
Make sure that the gun, the high pressure hose and the
pump are dry.
WARNING
Make sure that children cannot come near the machine.
7
English
EN
Loading ...
Loading ...
Loading ...