Loading ...
Loading ...
Loading ...
aus Troubleshooting
52
Fault Cause and troubleshooting
All LEDs lit up or
flashing.
Electronics have detected a fault.
1. Press the main switch button for approx.
4seconds.
→"Controls", Page16
The appliance is reset and restarted.
2. If the problem occurs again:
‒ Switch off the appliance.
‒ Pull out the mains plug or switch off the fuse in
the fuse box.
‒ Wait at least 2minutes.
‒ Switch on the fuse in the fuse box or insert the
mains plug.
‒ Switch the appliance on.
3. If the problem occurs again:
‒ Contact customer service.
→"Customer Service", Page56
Fault Cause and troubleshooting
Appliance door can-
not be closed.
Door lock has been activated.
▶ Close the appliance door with greater force.
Door cannot be closed due to installation method.
▶ Check whether the appliance has been installed
properly.
When closed, the appliance door, its decor or at-
tached parts should not knock against adjacent
cabinets or the worktop.
Lid on the detergent
dispenser cannot be
closed.
Detergent dispenser or lid are blocked by sticky deter-
gent residue.
▶ Remove detergent residue.
Fault Cause and troubleshooting
Filling valves making
knocking noises.
Caused by the domestic installation. No appliance
fault present. Does not affect functioning of the appli-
ance.
▶ Can only be remedied in the domestic installation.
Knocking or rattling
noise.
Spray arm is striking tableware.
▶ Arrange tableware so that the spray arms do not
strike tableware.
With a small load the water jets directly strike against
the tub.
▶ Distribute the tableware evenly.
Loading ...
Loading ...
Loading ...