Loading ...
Loading ...
Loading ...
aus Troubleshooting
50
Fault Cause and troubleshooting
Detergent residue is
present in the deter-
gent dispenser or the
tablet collecting tray.
Detergent dispenser was damp when detergent was
added.
▶ Only add detergent to a detergent dispenser when
dry.
Excessive formation of
foam occurs.
Hand washing-up liquid is present in dispenser for
rinse aid.
▶ Immediately add rinse aid to the dispenser.
→"Adding rinse aid", Page25
Rinse aid has been spilled.
▶ Remove the rinse aid with a cloth.
Detergent or appliance care product used causes ex-
cessive foaming.
▶ Change the brand of detergent.
Fault Cause and troubleshooting
Connection to home
network is not estab-
lished.
WLAN on router is not active.
▶ Check the wireless network connection of your
router.
WLAN display is flash-
ing.
Connection to home network is not available.
▶ Activate the wireless network connection on your
router.
Home Connect cannot
be implemented cor-
rectly.
Home Connect set incorrectly.
▶ Please consult the documents supplied for
HomeConnect.
Technical fault is present.
▶ Please consult the information about support in the
documents supplied for HomeConnect.
Fault Cause and troubleshooting
Refill indicator for
rinse aid lights up.
Insufficient rinse aid.
1.
Add Rinse aid →Page25.
2. Set the amount of rinse aid to be dispensed.
→"Setting the amount of rinse aid", Page26
Refill indicator for
rinse aid does not
light up.
Rinse aid system is switched off.
▶ Set the amount of rinse aid to be dispensed.
Fault Cause and troubleshooting
Water is left in the ap-
pliance at the end of
the programme.
Filter system or area under the filters is blocked.
1.
Clean the Filters →Page40.
2.
Clean the Wastewater pump →Page54.
Loading ...
Loading ...
Loading ...