Loading ...
Loading ...
Loading ...
Remote control panel
Note:
If wireless remote controller is lost, open the surface panel and operate manually.
5
SIGNAL RECEIVER
2
3
- 18 -
SWING BUTTON
Activate the automatic air swing function.
FAN SPEED BUTTON
Select the fan speed LOW, MID, HIGH and AUTO in sequence.
4
TEMP/TIMER BUTTON
Pres
s th e keypa d t o increas e th e set (operating )
temperature of the unit.and Press th
e keypad to
decrease the set (operating) temperature of the unit.
The temperature setting range is from 16~30℃.
Timer can be set by pressing / button. Timer can be
set in 0.5hour increments between 1 and 10 hours, or in
1hour increments for 10 hours or above after each push
on or button.
6
MODE BUTTON
Select the operation mode, AUTO, COOL, DRY,
FAN (for reverse cycle model)
7
FILTER BUTTON
This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation and
cooling. The LED (light) will illuminate after 250 hours
of operation. To reset after cleaning the filter, press the
"Check Filter" button and the light will go off.
1
ON/OFF BUTTON
Operation starts when pressing this button, and stops
when pre
ssi
ng
this button again.
Loading ...
Loading ...
Loading ...