Loading ...
Loading ...
Loading ...
MEDIA BED INSTALLATION
NOTE: The fireplace comes with the Faux Log Bed in place, and can be used as is. To switch to
crushed glass, river rocks or white stones, follow these steps with two capable adults.
STEP 6: You must unplug the backlight connector prior to completing any further steps.
When facing the unit, the connector plug is located on the left of the fireplace.
STEP 6a: While one person holds the glass panel, remove the two screws at the top edge of the
fireplace with a screwdriver. Together, carefully remove the front glass panel and set it
aside on a clean soft surface.
STEP 6b: Remove the two log bed screws (one at each end of the log bed), and lift the log bed out.
This next step involves GLASS! ALWAYS use extreme caution when handling glass.
Failure to do so could result in personal injury or property damage.
ALWAYS keep the decorative glass OUT OF REACH OF CHILDREN AND PETS! Leave
no glass pieces where children or pets can find them. Failure to do so could cause a
choking hazard.
6b
Loosen
6a
Faux Log Bed
Loading ...
Loading ...
Loading ...